Insert Collets
(back to Accessories)
 |
||
| Inch & Metric Sizes | Insulation Pins | Accessories |
Insert collets are fixed depth (not adjustable to suit the length of the stud).
Approximately 1/8"(3mm) of the stud should protrude from the collet.
Example...for an 8-32 x 1/2" weld stud use collet part no. 669-205-3/8.
SIZE |
PART NO. |
'D' DEPTH (part no. suffix) |
|||||
| 4-40UNC, 12GA. | 669-237- | 1/4 6mm (for studs 3/8-1/2 long) |
3/8 10mm (for studs 1/2-3/4 long) |
1/2 12mm (for studs 5/8-1.0 long) |
5/8 16mm (for studs 3/4-1.0 long) |
3/4 20mm (for studs 1.0-1.1/4 long) |
1.0 25mm (for studs >1.1/4 long) |
| 1/8 | 669-239- | ||||||
| 3mm | 669-238- | ||||||
| 6-32UNC, 10GA. | 669-204- | ||||||
| 8-32UNC, 4mm | 669-205- | ||||||
| 3/16, 10-24UNC, 10-32UNF, 5mm | 669-210- | ||||||
| 0.217 | 669-211- | ||||||
| 6mm | 669-208- | ||||||
| 1/4 | 669-206- | ||||||
| 5/16, 8mm | 669-209- | ||||||
| 3/8 | 669-241- | ||||||
| 10mm | 669-242- | ||||||
Return to Top
Insert Collets - Insulation Pins  |
|
SIZE |
PART NO. |
| 10 Ga. | 669-212 |
| 12 Ga. | 669-213 |
Return to Top
 |
TAPER - INSERT COLLET BASE 669-207 |
Return to Top