|
PKM-1B
Part No: PKM-1B-???
For welding up to 3/8" (10mm) diameter CD weld studs in mild steel and stainless steel.
Standard cable set length is 16ft (5m) for the Clipper and Classic and 25ft (8m) for the Pinto.
This gun can be retro-fitted to almost all makes and models of Contact CD welders.
With adjustable spring pressure and a variety of different "front end" setups it lends itself to many different applications.
|
|
PHM-1A
Part No: PHM-1A
For welding up to 1/4" (6mm) diameter CD weld studs in aluminum and 5/16" (8mm) in mild and stainless steel.
This gun is fitted to the SignUS GAP CD welder and gives excellent results on aluminum applications.
Standard cable set length is 10ft (3m).
Longer cable lengths are available by special order.
|
Brochure
|
Heavy Duty Drill Stand
Part No: 602-071
With adjustable head height, depth stop and heavy "T" slot base for attachment of fixtures.
An ideal companion to the PKM-1B, Bantam CD or ARC weld gun which will help with weld consistency and accuracy.
|
Note: When ordering a replacement weld gun always specify equipment type and connector type.
|
|
BANTAM C8
Part No. 602-325A (R/S 4 pin metal control connector)
Part No. 602-325C (Black 3 pin plastic control connector)
For welding up to 5/16" (8mm) diameter CD weld studs in mild steel and stainless steel.
Standard cable set length is 16ft (5m).
Longer cable lengths are available by special order.
Originally fitted to all Clipper and Classic models.
|
|
BANTAM Pinto C8
Part No. 602-325P
Part No. 602-325P-25
Fitted as standard to all Pinto models and has a modified spindle to accept B collets for welding all insulation pins in mild steel, stainless steel and aluminum.
The original cable set length was 16ft (5m), but later models have a cable set length of 25ft (8m).
|
![BANTAM C10 Gun](../images/Guns/a581.gif)
|
Parts List |
Manual |
|
BANTAM C10
Part No. 602-343A
For welding up to 3/8" (10mm) diameter CD weld studs in mild steel and stainless steel.
Standard cable set length is 16ft (5m).
Longer cable lengths are available by special order.
|
|
PHM-12
Part No: PHM-12-?
For welding up to 1/2" (12mm) diameter ARC weld studs in mild and stainless steel.
Normally used for ARC welding with ferrules, but can be fitted with optional accessories for inert gas stud welding.
Its light weight and small footprint make it ideal for use in tight areas.
Standard cable set length is 16ft (5m).
Extension cable sets are available separately.
|
|
PHM-10
Part No: PHM-10-?
For welding up to 5/16" (8mm) diameter Short Cycle weld studs in mild and stainless steel.
Its light weight and small footprint make it ideal for use in tight areas.
Standard cable set length is 16ft (5m).
Extension cable sets are available separately.
|
|
BANTAM A-58
Part No. 602-378A
Ideal for welding up to 1/2" (12mm) diameter ARC weld studs in mild steel and stainless steel.
Its small size and light weight make it an ideal choice for use with most drawn arc stud welding systems.
Standard cable set is 6ft (2m).
Extension cable sets are available separately.
|
![PHM-161 Weld Gun](../images/Guns/phm-161%20md.jpg)
|
Parts List |
Manual |
|
PHM-161
Part No. PHM-161-?
For welding up to 5/8" (16mm) diameter ARC weld studs in mild steel,
stainless steel, and aluminum. Standard cable set is 8ft (3m).
This model is fitted with a plunge dampener, recommended for vertical and overhead stud welding and for welding aluminum studs.
Extension cable sets are available separately.
|
![PHM-251 HD Weld Gun](../images/Guns/phm-251%20hd.bmp)
|
Parts List |
Manual |
|
PHM-251 HD
Part No. PHM-251-?
Heavy duty version of the PHM-161 weld gun for welding up to 1" (25mm) diameter ARC weld studs in mild steel and stainless steel.
Standard cable set is 8ft (3m).
This model is fitted with a plunge dampener, recommended for vertical and overhead stud welding, for welding aluminum studs and for weld thru' deck applications.
Extension cable sets are available separately.
|