ARC Collar Studs
(back to Weld Studs)
 |
Mild Steel |
| Stainless Steel | |
| Other diameters, lengths and materials are available by special order...minimum quantities may apply. Call Cutlass for part numbers not shown. |
|
Printer friendly version in Adobe PDF format
| (Stock Sizes) |
|||||
| A = Thread | B = Thread Length | E = Collar Diameter | C = Base Diameter | D = Base Length (to top of collar) |
Part No. |
| 1/4-20 | 1/2" | 1/2" | .215" | 11/16" | 3601-9705C |
| 1/4-20 | 3/4" | 1/2" | .215" | 5/8" | 3601-9701 |
| 1/4-20 | 3/4" | 1/2" | .215" | 1.1/8" | 3601-9711 |
| 5/16-18 | 3/4" | 5/8" | .275" | 5/8" | 3601-9801 |
| 5/16-18 | 5/8" | 5/8" | .275" | 3/4" | 3601-9803 |
| 3/8-16 | 5/8" | 5/8" | .330" | 1/2" | 3601-9901 |
| 3/8-16 | 5/8" | 5/8" | .330" | 5/8" | 3601-9902 |
| 3/8-16 | 5/8" | 5/8" | .330" | 3/4" | 3601-9906 |
| 3/8-16 | 5/8" | 5/8" | .330" | 1" | 3601-9903 |
| 3/8-16 | 5/8" | 5/8" | .330" | 1.1/8" | 3601-9904 |
| 3/8-16 | 5/8" | 5/8" | .330" | 2.1/8" | 3601-9924 |
| 3/8-16 | 5/8" | 5/8" | .330" | 2.1/4" | 2601-9928 |
| 3/8-16 | 5/8" | 5/8" | .330" | 2.3/8" | 3601-9912 |
| 3/8-16 | 5/8" | 5/8" | .330" | 4.1/8" | 3601-9925 |
| 3/8-16 | 3/4" | 5/8" | .330" | 1" | 3601-9907 |
| 3/8-16 | 3/4" | 5/8" | .330" | 2" | 3601-9905 |
| M8 | 19mm | 16mm | 7mm | 10.5mm (AW) | 3631-0819 |
| M8 | 19mm | 16mm | 7mm | 19mm (AW) | 3631-0820 |
| M10 | 19mm | 16mm | 9mm | 12mm (AW) | 3631-1002 |
| M10 | 19mm | 16mm | 9mm | 25mm (AW) | 3631-1003 |
|
Studs will be approximately 1/8" shorter after weld. All 1/4" collar studs use ferrule part no. CS-08, all 5/16" collar studs use ferrule part no. CS-10, and all 3/8" collar studs use ferrule part no. CS-12. |
|||||
Return to Top
| (Stock Sizes) |
|||||
| A = Thread | B = Thread Length | E = Collar Diameter | C = Base Diameter | D = Base Length (to top of collar) |
Part No. |
| 1/4-20 | 1/2" | 1/2" | .215" | 9/16" | 3602-9702 |
| 3/8-16 | 5/8" | 5/8" | .330" | 1.1/8" | 3602-9904 |
| 3/8-16 | 1.1/4" | 5/8" | .330" | 3/4" | 3602-9910 |
| 3/8-16 | 5/8" | 5/8" | .330" | 1" | 3605-9902* |
| 3/8-16 | 3/4" | 5/8" | .330" | 5/8" | 3605-9901* |
|
Studs will be approximately 1/8" shorter after weld. All 1/4" collar studs use ferrule part no. CS-08, all 5/16" collar studs use ferrule part no. CS-10, and all 3/8" collar studs use ferrule part no. CS-12. * 316 Stainless Steel
|
|||||
Return to Top