Cutlass ARC 410 Stud Welder
(back to Equipment)
The Cutlass ARC-410 Stud Welding System was designed and manufactured to answer customer demands for a compact, portable, self contained Power Source / Timer Controller suitable for factory or shipyard environments.
It is capable of welding in Drawn Arc or Short Cycle mode and its small size and portability make it ideal for Shipyard Structural and Insulation applications.
![]() |
![]() |
![]() |
ARC 410 Parts List
![]() |
PHM-12 Parts List
![]() |
PHM-10 Parts List
![]() |
FEATURES:
Solid State system with phase controlled current to 400 amps. Continuous Time control from 5 to 350 milliseconds. Available with PHM-12 weld gun (drawn arc with ferrules) or PHM-10 weld gun (short cycle).
Solid State system with phase controlled current to 400 amps. Continuous Time control from 5 to 350 milliseconds. Available with PHM-12 weld gun (drawn arc with ferrules) or PHM-10 weld gun (short cycle).
TECHNICAL DATA |
|
Model: ARC 410 SYSTEM (PHM-12) ARC 410 SYSTEM (PHM-10) Controller only PHM-10 weld gun PHM-12 weld gun #2 Twin Ground Cable 16ft. |
Part Number: CSS-45 CSS-45A 90-30-3035 90-10-3311 80-35-2712 90-50-3010 |
Operating Mode: | Drawn Arc / Short Cycle |
Stud Capacity: | 1/8" - 5/16" RB (3mm - 8mm) Weld Base Diameter |
Power Requirements: | 230/460 Volts (50/60 Hz) Three Phase |
Fusing: | 50/25 Amps |
Output: | up to 400 Amps RMS |
Weld Gun: | Cutlass PHM-10 or PHM-12 Weld Gun complete with footpiece, adjustable legs and 16 foot combination weld and control cables. |
Ground Cable: | 16 foot with ground clamp. |
Dimensions (WxHxL): | 8.0"x10.5"x16.0" (205x270x405mm) |
WEIGHT |
|
Controller: | 59lbs (27kg) |
Gun and Cables: | 12lbs (6kg) |
Gun (working weight): | 2lbs (1kg) |
Ground Cable: | 12lbs (6kg) |
Total Shipping Weight: | 98lbs (44kg) |
![Return to Top](../images/uparo.gif)
Return to Top